Is configured (cr 6599334), Panic and fail to boot (cr 6588452), Hba card installed (cr 6578410) – FUJITSU SPARC ENTERPRISE T5120 User Manual
Page 35

Important Information About the SPARC Enterprise T5120 and T5220 Servers
25
When Either NIU Port in the N2 CPU is Disabled the
Corresponding XAUI is Configured (CR 6599334)
When either NIU port in the CPU is disabled the corresponding XAUI should not be
configured. However, the ASR database for the corresponding XAUI is not updated
if either of the NIU port is disabled using the disablecomponent SP CLI command
or due to failures detected by POST. In this case the corresponding XAUI card is still
available in the OpenBoot device tree.
Booting Solaris OS From External USB DVD-ROM Drive
Could Cause Panic and Fail to Boot (CR 6588452)
Booting the Solaris 10 OS from an external USB DVD-ROM drive could panic the
server and fail to boot the OS. This happens because the Solaris OS names the device
storage@1
, and the system firmware names the device cdrom@1.
Both the OpenBoot firmware and Solaris OS follow the 1275 USB bindings rules to
name nodes. For example:
The Solaris 10 OS always names the node as storage@n. So, the storage device with
a subclass of 2, 3, or 4 (SPARC Enterprise T5120 and T5220 must be 2) cannot boot
with Solaris 10 OS DVD.
Workaround: Use the drive whose subclass is not 2, 3, or 4 as the replacement.
SPARC Enterprise T52x0 Hangs When Trying to Boot With
Infiniband HBA Card Installed (CR 6578410)
The server could hang when trying to boot with an Infiniband HBA card installed.
TABLE 4
1275 USB Bindings Rules for Naming Nodes
bInterface Class
bInterface Subclass
bInterface Protocol
Name
0x08
1
Any
storage
0x08
2
Any
cdrom
0x08
3
Any
tape
0x08
4
Any
floppy
0x08
5
Any
storage
0x08
6
Any
storage
0x08
Any
Any
storage