FieldServer Data Aire (DAP) FS-8704-49 - Manual (Page 9)

FS-8700-49_Data_Aire_DAP Page 9 of 48
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll_Free: 888-509-1970 email: [email protected]
4.3. Client Side Node Descriptors
Section Title
Nodes
Column Title Function Legal Values
Node_Name Provide name for node Up to 32 alphanumeric characters
Node_ID
Modbus station address of
physical server node
1-259
Protocol Specify protocol used DAP
Connection
Specify which port the device is
connected to the FieldServer
P1-P8, R1-R2 3
Example
// Client Side Nodes
Nodes
Node_Name Node_ID Protocol Connection
Unit1, 1, DAP, R1
4.4. Client Side Map Descriptors
4.4.1. FieldServer Related Map Descriptor Parameters
Column Title Function Legal Values
Map_Descriptor_Name
Name of this Map
Descriptor Up to 32 alphanumeric
characters
Data_Array_Name
Name of Data Array
where data is to be
stored in the
FieldServer
One of the Data Array
names from “Data Array”
section above
Data_Array_Offset
Starting location in Data
Array 0 to maximum specified in
“Data Array” section above
Function
Function of Client Map
Descriptor
RDBC, WRBC, WRBX
3
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction
manual for details of the ports available on specific hardware.
This is the connection to the primary port identified with the
'Port' keyword in the connection configuration described in
Section 4.2