beautypg.com

Figure 8 – Fortinet FortiGate 5050 User Manual

Page 16

background image

Connecting the FortiGate-5050 chassis to AC power using the FortiGate-5053 power converter tray

FortiGate-5050 Chassis Guide

16

01-30000-87211-20090106

http://docs.fortinet.com/

Feedback

Figure 8: Front panel of the FortiGate-5053 power converter tray with one power supply

removed

The LEDs for each installed power supply are visible from the FortiGate-5053 power
converter tray front panel.

The back panel of the FortiGate-5053 (shown in

Figure 9

) includes one DC power

connector terminal consisting of a RTN connector and a -48VDC connector.
• The -48VDC connector is labelled V- and may also be labelled with -48V (BLACK).
• The RTN connector is labelled V+ and may also be labelled RTN (RED)

Figure 9: Back panel of the FortiGate-5053 power converter tray

The back panel also includes three AC power connectors numbered 1, 2, 3. The AC
connector numbering corresponds to the slot numbering showing in

Figure 8

. Each

connector connects AC power directly to a FortiGate-5020/5050 power supply. The
FortiGate-5053 can contain 1, 2, or 3 FortiGate-5020/5050 power supplies depending on
your requirements. You should only connect AC power to the power supplies that are
installed.

Table 5: FortiGate-5020/5050 power supply LEDs

LED

State

Description

AC Power

Green

The power supply is connected to AC power.

Off

The power supply is not receiving DC power. This can happen if an AC

cable is not connected, if the power supply is not correctly installed in

the slot, or if the power supply is not functioning.

DC Power

Green

The power supply is providing DC power.

Off

The power supply is not providing DC power. If the AC power LED is lit

and the DC power LED is not, the power supply is not functioning

correctly and should be replaced. This LED can also go off if the power

supply overheats. If this happens the power supply stops supplying DC

power. After the power supply cools down in will start supplying DC

power again and this LED lights.

Slot 1

Slot 2

AC Power

LED

DC Power

LED

Slot 3

V-

V+

100-240VAC 1 2 3

RTN(RED) -48V(BLACK)

AC in

V+

(RTN)

(RED)

V-

-48V

(BLACK)

DC out