3 deleting aural and visual alarms – Furuno GP-1600F User Manual
Page 68
4 – 3
5) Press the [NU/CU ENT] key.
6) Press the [MENU ESC] key.
Note:
Avoid exceeding the default arrival alarm range (00.500 nm)
to prevent release of the alarm on a distant waypoint.
Disabling the alarms
Select OFF” in step 3 in "4.2 Enabling/Disabling the Alarms" and
then press the [NU/CU ENT] and [MENU ESC] keys.
4.3 Deleting Aural and Visual Alarms
When an alarm setting is exceeded, both aural and visual alarms
are released. You can silence the aural alarm and erase the visual
alarm by pressing the [CLR] key. The aural and visual alarms will
be generated at the next violation of the active alarm(s).
See also other documents in the category Furuno GPS receiver:
- MARINE RADAR 1953C (100 pages)
- GP-1650D (2 pages)
- GP-1650WD (96 pages)
- GP-1650W (96 pages)
- NAVNET 1943C-BB (92 pages)
- GD-3300 (137 pages)
- DUAL GPS GP-150-DUAL (130 pages)
- GP-1650WF (113 pages)
- CH-300 (124 pages)
- NX-300 (65 pages)
- NX-300 (2 pages)
- GP-1850WDF (115 pages)
- GP-3500 (192 pages)
- GP-1850WD (44 pages)
- GP-1850W (98 pages)
- GP-1850WD (98 pages)
- GP-1850W (4 pages)
- GP-1850W (98 pages)
- INTERFACE UNIT IF-2500 (12 pages)
- GP-31 (2 pages)
- GP-33 (98 pages)
- GP-7000 (28 pages)
- GP-7000 (2 pages)
- GP37 (2 pages)
- GP-90 (36 pages)
- CI-35 (69 pages)
- GP-1850DF (63 pages)
- GP-1850F (110 pages)
- GP-30 (2 pages)
- FCV-30 (110 pages)
- BACK GP-80 (103 pages)
- LC-90 MARK-II (2 pages)
- GP-1650W (44 pages)
- DD-80 (119 pages)
- RP-250 (73 pages)
- GP-1650 (94 pages)
- GP-185F (4 pages)
- GP-1850D (94 pages)
- GP-7000F (132 pages)
- GP-7000F (52 pages)
- GP-36 (81 pages)
- GP-150-DUAL (123 pages)
- GP-80 (37 pages)
- 1650WDF (4 pages)