Furuno GP-1600F - Manual (Page 37)

2 – 13
SELECT GOTO MODE
▲
WPT List
EVENT List
ROUTE List
▼ Cursor/Route Plan
CLR: Release
ENT:Sel ESC:Cancel
Figure 2-14 Destination waypoint selection menu
2) Press the [▲] key to select WPT List.
3) Press the [NU/CU ENT] key. The waypoint list appears.
WAYPOINT LIST
No LAT/LONG COMMENT
001 BUOY
002 ANK
010 PORT
:Cursor : Page change
ENT:Edit CLR:Release
MENU:Sel Mode
* : In use
34° 45.567' N
135° 23.321' W
34° 45.231' N
135° 33.456' W
34° 42.316' N
135° 21.678' W
Figure 2-15 Waypoint list
4) Operate the [▲] or [▼] keys to select a waypoint number.
5) Press the [NU/CU ENT] key.
• A dashed line runs between waypoint selected and own ship’s
position.
• The range and bearing to the destination appear at the bottom of
the display.
WP001 120.0° 223.8nm
CSE 180.0° SPD 16.8kt 2D
DEP 113.6 ft TMP 16.0°C 12.0V
POS 34°26.345'N 135°41.232'E
01
00
Figure 2-16 Appearance of display when destination is selected
by waypoint