6 shifting the plotter display – Furuno GP-1600F User Manual
Page 30
2 – 6
2.6 Shifting the Plotter Display
Centering ship’s position
1) Press the [CURS] key to turn off the cursor if it is currently
displayed.
2) Press the [CNTR] key.
Note:
NAVIONICS chart may not center ship's position perfectly.
Centering a location
1) Press the [CURS] key to turn on the cursor if it is not currently
displayed.
2) Operate the [Arrow] keys to set the cursor on the location you
want to center.
3) Press the [CNTR] key.
Note:
NAVIONICS chart may not center cursor position perfectly.
Scrolling the display
1) Press the [CURS] key to turn off the cursor if it is currently
displayed.
2) Operate the [Arrow] keys to scroll the display in direction de-
sired.
The display is scrolled when the cursor reaches an edge of the
screen.
See also other documents in the category Furuno GPS receiver:
- MARINE RADAR 1953C (100 pages)
- GP-1650D (2 pages)
- GP-1650WD (96 pages)
- GP-1650W (96 pages)
- NAVNET 1943C-BB (92 pages)
- GD-3300 (137 pages)
- DUAL GPS GP-150-DUAL (130 pages)
- GP-1650WF (113 pages)
- CH-300 (124 pages)
- NX-300 (65 pages)
- NX-300 (2 pages)
- GP-1850WDF (115 pages)
- GP-3500 (192 pages)
- GP-1850WD (44 pages)
- GP-1850W (98 pages)
- GP-1850WD (98 pages)
- GP-1850W (4 pages)
- GP-1850W (98 pages)
- INTERFACE UNIT IF-2500 (12 pages)
- GP-31 (2 pages)
- GP-33 (98 pages)
- GP-7000 (28 pages)
- GP-7000 (2 pages)
- GP37 (2 pages)
- GP-90 (36 pages)
- CI-35 (69 pages)
- GP-1850DF (63 pages)
- GP-1850F (110 pages)
- GP-30 (2 pages)
- FCV-30 (110 pages)
- BACK GP-80 (103 pages)
- LC-90 MARK-II (2 pages)
- GP-1650W (44 pages)
- DD-80 (119 pages)
- RP-250 (73 pages)
- GP-1650 (94 pages)
- GP-185F (4 pages)
- GP-1850D (94 pages)
- GP-7000F (132 pages)
- GP-7000F (52 pages)
- GP-36 (81 pages)
- GP-150-DUAL (123 pages)
- GP-80 (37 pages)
- 1650WDF (4 pages)