13 standard settings, Smart combi, Operation – Henny Penny SMART COMBI FM05-061-A User Manual
Page 58
3.
Use C o m b i D i a l ( 9 ) to enter the password “111”.
4.
Use C o m b i D i a l ( 9 ) to select the “Service water volume” menu.
5.
Set the water volume (in 100 litre increments) with C o m b i D i a l ( 9 ) .
4.13 Standard settings
The unit is already pre-configured when delivered.
The values listed in the following table can be adjusted individually (see
Chapter “Changing standard settings”, Page 57
Explanation
Possible settings
Pre-set value
Parameters
No.
Changeover summer time/winter time
is automatic. Date format: Parameter
144
Time/date
The operator's
local time
Time/date
000
Temperature display in °F is irrespective
of the system language.
°C/°F
in °C
Temperature reading
006
On: At the end of the cooking time the
lighting flashes in addition to the
acoustic signal sounding. It flashes as
long as the signal sounds.
On/off
On
Lighting flashes
023
Increase the preheat factor for full loads
of large masses (roasts, loaves of
bread) to prevent the temperature from
falling too much.
0–30 %
15
Preheat factor %
082
Applies for external water preparation
systems and only for the soft water
connection.
Chapter “Set service interval water
for further informa-
tion.
0–90000 l in 100 l in-
crements
0
Service water volume
076
DD = day
MM = month
JJJJ = year
●
DD.MM.YYYY
●
YYYY/MM/DD
●
MM/DD/YYYY
DD.MM.YYYY
Date format
144
●
Free: you can change,delete or save
programs
●
Blocked: you may not change,delete
or save programs. But you may
make changes during the cooking
process.
●
Fully blocked: No changes are pos-
sible in the SmartMenu program
memory or during the cooking pro-
cess.
●
Free
●
Blocked
●
Fully blocked
Free
SmartMenu program
memory
097
Set “fan cycle operation”. The temperat-
ure in the cooking chamber can be kept
to 14 °C (57.2 °F) for 6 h by placing an
ice block in the bottom drawer.
On/off
Off
Time delay fan
032
Global Foodservice Solutions
Operating manual
58
SmartCombi
™
Operation