Henny Penny SMART COMBI FM05-061-A - Manual (Page 28)

●
Cooking large roasting joints
●
Low temperature cooking
●
Cooking small loads
NOTICE
The reduced heat output increases the cooking time. For this reason,
the function is not suitable for the “Perfection” (climate and regeneration)
cooking mode.
3.7 Add functions
With the add functions, individual cooking steps can be adjusted to suit
the food being cooked, in order to further optimise the cooking result.
The following add functions are available.
●
SES steam exhaust system
●
Cycle fan operation
●
Reduced fan speed
●
End of step signal
3.7.1 SES steam exhaust system
The unit is equipped with a safety steam extraction system. The SES
steam exhaust system extracts the steam from the cooking chamber
and condenses it at the end of the cooking time.
This avoids annoying clouds of steam escaping from the cooking chamber
when opening the door after cooking has finished. The function has no
effect on the cooking results.
The function is activated as default for all cooking programs longer than
6 minutes.
There is an add function allowing you to turn off the SES steam exhaust
system.
3.7.2 Cycle fan operation
With the add function cycle fan operation, the fan operates in interval
mode.
The function can be combined with the add function “reduced fan speed”
in order to obtain 6 different fan speeds in the cooking chamber.
3.7.3 Reduced fan speed
The add function reduced fan speed lets you reduce the air circulation
in the cooking chamber, in several stages, for dishes that are easily
Global Foodservice Solutions
Operating manual 28
SmartCombi ™
Construction and function