Henny Penny SMART COMBI FM05-061-A - Manual (Page 48)

4. Press C o m b i D i a l ( 9 ) to select SmartMenu cooking programs to
load.
5. Press the right bu t t o n (6) to SmartMenucooking programs.
receiving 1
7 USB } cookbook SmartMenu cooking programs are loaded from the USB memory stick.
While it is saving, the multi-function display (4) flashes “Loading” on the
screen.
The total number of cooking programs loaded appears.
Cookbook loaded 50
7 USB } cookbook
Once it has been saved, the multi-function display (4) shows “Cookbook
loaded” on the screen and the total number of loaded cooking programs.
NOTICE
If a SmartMenu cooking program of the same name is already on the
device, it will be overwritten.
4.9 Manual cooking
4.9.1 Starting the steaming process
Requirements Unit is switched on
1. Press S t e a m i n g ( 1 5 ) .
2. Set the cooking temperature.
3. Set the cooking time.
4. Set the target core temperature if desired.
5. Load the unit.
6. Insert the core temperature sensor into the food to be cooked (see
Chapter “Measuring the core temperature”, Page 39 ).
7. Press S t a r t / S t o p ( 8 ) .
The multi-function display (4) shows:
- the set cooking temperature
- the set cooking time
- the target core temperature
4.9.2 Start Combisteaming
Requirements Unit is switched on.
1. Press C o m b i s t e a m i n g ( 3 ) .
2. Set the cooking temperature.
3. Set the cooking time.
Global Foodservice Solutions
Operating manual 48
SmartCombi ™
Operation