Heartland Toledo XT - Manual (Page 12)

Using your Range
12
The Clock
Setting the time of day
Setting knob Adjusting knob
When the clock is first connected the display will
flash (
) and ( ) alternately.
To set the clock to read
the time of day turn and
hold the Setting knob to
the clock symbol ( ) and
at the same time turn the
Adjusting knob left or right
until the clock shows the
time of day. .
Let go of the Setting knob and it will spring back to
the vertical ( ) oven manual setting.
If the key symbol ( ) appears on the left of the display
you have accidentally turned on the key lock feature.
See the section ‘Clock Special Features’.
To time something that’s cooking
(minute minder)
Turn the Setting knob
to the right to the ( )
minute minder setting - it
should click into position.
Use the adjustment knob
to set the time you need.
You can turn the knob
back to the ( ) manual
setting to keep an eye on
the time of day or leave it
in the ( ) minute minder
position as the time ticks
down.
To stop the beeper when it sounds
Turn the Adjusting knob counter clockwise
To stop automatically
Use when you have started the oven manually.
Turn the Setting knob to
the ( ) position.
Use the adjustment knob
to set the time you need.
‘Stop Time’ shows.
AUTO will show in the
display.
Turn the Setting knob to the (
AUTO
) setting.
When your cooking is finished the beeper sounds.
Turn the Setting knob to the vertical ( ) to return to
manual cooking.
To start and stop the oven
automatically (delayed baking)
Before you set the clock, you must have two
numbers clearly in mind.
The ‘cook time’, which is the period of time you want
the oven to cook. The maximum cooking time is 11
hours 59 minutes.
The ‘stop time’, which is the time of day you want
the oven to stop cooking. This must be less than 12
hours from the current time.
You cannot set a start time directly - this is set
automatically by setting the cooking period and stop
time.
Turn the Setting knob to
the ( ) position.
Use the Adjusting knob to
set the ‘cooking time’ you
need.