Bolt VX-760C Wireless TTL Flash for Cameras - Manual (Page 38)

38 | 38 | Using Your VX-760C as a Wireless Master or Slave
Using Your VX-760C as a Wireless Master or Slave
The VX-760C is equipped with advanced wireless flash functions, allowing you to fire the flash remotely while
maintaining full TTL or manual control. In addition, the flash can be set to multiple channels and groups, giving
you a host of creative lighting possibilities.
Important terms: Here are the terms you’ll need to be familiar with in order to learn how to work with multiple
wireless flash units:
Master: This can be the camera’s built-in flash, a flash unit mounted on the camera, or a dedicated wireless
controller. The master controls how the slave flashes operate in wireless TTL mode. Only one master flash is
allowed in a multiple-flash photography setting. Note that not all cameras and flashes offer master capability.
Slave or remote flash: Flash units that are not directly connected to the camera and are controlled via the
master flash or a controller are called slave or remote units. There is no limitation on the number of slave flash
units that can be used at once.