beautypg.com

Using the manual flash mode, Zoom – Bolt VX-760C Wireless TTL Flash for Cameras User Manual

Page 26

background image

26

|

26

|

Using the Manual Flash Mode

Using the Manual Flash Mode

You can set the VX-760C’s flash output level manually, for greater creative control over your images. The 1/1
setting is the full-power flash, and each successive setting halves the light output, all the way down to 1/128.
You can also fine-tune the flash output in increments of one-third.

To use the manual mode, turn the flash and camera on and follow these steps:

1. Press the MODE button repeatedly to cycle through the flash modes until the manual mode indicator and

the flash output level appear on the LCD. Use the left and
right navigation buttons to set the flash output, and the up
and down navigation buttons to fine-tune.

2. Set the exposure settings you want to use on your camera.
3. Press your camera’s shutter-release button to take the

picture.

4. Adjust your camera’s exposure settings and the light output

level of the flash as needed.

Zoom