Bolt VX-760C Wireless TTL Flash for Cameras - Manual (Page 11)

Warnings | 11
• Do not use or store the VX-760C in flammable conditions (such as environments containing flammable
gases or liquid chemicals). This can damage the flash, start a fire, or cause an electric shock.
• Do not clean the VX-760C with agents containing corrosive or flammable substances such as paint thinner,
benzene, or nail polish remover.
• This product is not water resistant. Keep it away from rain, snow, humidity, and general moisture.
• Should the VX-760C sustain physical damage, do not touch any exposed interior metal parts. If touched,
they may generate an electric shock or cause a malfunction. Promptly remove the batteries and take the
product to an authorized service center for repair.
• If you detect excessive heat, smoke, or a burning smell coming from the flash, immediately stop operation
and remove the batteries to prevent the product from igniting or melting. Take the product to an authorized
service center for repair.
• Do not drop or otherwise cause a strong physical impact to the VX-760C, as this can cause a malfunction
that may cause it to explode or ignite.
• Remove all batteries from the VX-760C before long-term storage in order to prevent the product from
igniting or leaking corrosive liquids.
• Do not store or use this product at temperatures above 104°F (40°C).
• Keep the metal contacts in the battery compartment clean and free of corrosion and dirt. Do not touch
them with your fingers. Corrosive elements on the contacts can damage the VX-760C and prevent it from
functioning properly. Contacts may be cleaned with isopropyl alcohol on a cotton swab.