Bolt VX-760C Wireless TTL Flash for Cameras - Manual (Page 12)

12 | Installing Batteries
• Dispose of used batteries properly. Never heat them or throw them into a fire, as this can cause the
batteries to leak corrosive liquids, generate heat, or explode.
Installing Batteries
The VX-760C can be powered by four AA batteries of several types:
• Lithium (1.5 V)
• Nickel-metal hydride (Ni-MH) (1.2 V)
• Alkaline (1.5 V)
Note: For the fastest recycle times and longest battery life, lithium or Ni-MH batteries are recommended.
To install batteries, make sure the VX-760C is turned off and follow these steps:
1. Press on the battery compartment cover and slide it in the direction of the arrow to open it.
2. Insert batteries in the orientations indicated by the illustrations inside the compartment.