Using the autofocus-assist light, Bouncing your flash – Bolt VX-760C Wireless TTL Flash for Cameras User Manual
Page 31
|
31
Using the Autofocus-Assist Light
|
31
Using the Autofocus-Assist Light
Camera autofocus systems can have difficulty locking onto a subject in dim light. When the ambient light level
is low, the VX-760C will emit a red autofocus-assist beam when you press your camera’s shutter-release
button halfway in order to autofocus. The camera will then be able to autofocus by locking onto the projected
light.
Note:
The autofocus-assist light is available only when your camera’s autofocus system is set to One Shot or
AI Focus. It is not available when AI Servo is selected.
Bouncing Your Flash
The VX-760C flash head can tilt down to -7°, and up at 45°, 60°, 75°, and 90° angles to the lens. It can also
swivel horizontally 180° to the right and 90° to the left.