Bolt VX-760C Wireless TTL Flash for Cameras - Manual (Page 35)

| 35 Using Rear- or Second-Curtain Synchronization | 35
the end of the exposure. Since rear-curtain sync causes motion blur and light trails to appear behind moving
subjects, it creates a more realistic impression of movement and is most often preferable to front-curtain sync.
When rear-curtain sync is activated, the rear-curtain sync icon (
) appears on the LCD.
The VX-760C supports rear-curtain sync modes on cameras that offer
the setting. To select rear-curtain sync, follow these steps:
1. Make sure your flash is in TTL or manual mode.
2. Press the SUB button to make the rear-curtain sync icon (
)
blink.
3. Press the MODE button to select it.
To disable rear-curtain sync, repeat steps 2 and 3.
Use your camera’s shutter-priority or manual mode to control the amount
of blurring and light trails you capture by varying the shutter speed. For
more information on rear-curtain sync, consult your camera’s instruction manual.
Note: In E-TTL mode, the VX-760C will fire a preflash followed by the primary flash.
Zoom