Zoom – Bolt VX-760C Wireless TTL Flash for Cameras User Manual

Page 25

Text mode
Original mode

Using Flash Exposure Bracketing

2. Press the SUB button repeatedly until the FEB icon blinks. Use

the left and right navigation buttons to adjust the FEB value, and
the up and down navigation buttons to fine-tune. Press the SUB
button again to confirm your selection.

3. Use the left and right navigation buttons to set the flash

exposure compensation, and the up and down navigation
buttons to fine-tune.

To turn off flash exposure
compensation, set the FEB
value to 0 and press the SUB
button to confirm your selection.

Note:

The LCD will display 1b

after the first shot, and 2b after
the second shot. As always, the
flash exposure compensation will appear on the LCD before each shot. Flash exposure bracketing turns off
automatically after you fire three shots.

Important!

Make sure your flash is recycled and ready before taking each shot.

Zoom

NOTE