Kyocera TASKalfa 2552ci - Manual (Page 330)

6-50
Using Various Functions > Functions
Copying
Item Value Description
Off
1-sided >>
Booklet Finishing Binding Left,
Binding Right,
Binding Top Select the binding orientation of copies.
Cover Off
Cover:
Front Cover
Print Setting
Not Print,
Front Only,
Back Only, Duplex Select whether to add the cover. Select the
printing method for the cover to be
inserted.
Select [Cover], and then [Cover], and
specify the print setting for the cover to be
inserted. Select from [Not Print], [Back
Only], [Front Only], and [Duplex], and
press [OK].
Cover:
Back Cover
Print Setting
Not Print,
Front Only,
Back Only, Duplex
Staple/Fold Off, Fold Only,
Saddle Stitch To fold finished copies in half, select
[Staple/Fold] and then select [Fold Only].
To use saddle stitching, select [Staple/
Fold] and then select [Saddle Stitch].
Original Orientation Top Edge on Top,
Top Edge on Left,
Auto
*1
Select the orientation of the original
document top edge to scan correct
direction. Select [Original Orientation] to
choose orientation of the originals, either
[Top Edge on Top] or [Top Edge on Left].
Then press [OK].
2-sided >>
Booklet Original Binding Left/Right,
Binding Top Select the binding direction of originals.
Finishing Binding Left,
Binding Right,
Binding Top Select the binding orientation of copies.
Cover Off
Cover:
Front Cover
Print Setting
Not Print,
Front Only,
Back Only, Duplex Select whether to add the cover. Select the
printing method for the cover to be
inserted.
Select [Cover], and then [Cover], and
specify the print setting for the cover to be
inserted. Select from [Not Print], [Back
Only], [Front Only], and [Duplex], and
press [OK].
Cover:
Back Cover
Print Setting
Not Print,
Front Only,
Back Only, Duplex
Staple/Fold Off, Fold Only,
Saddle Stitch To fold finished copies in half, select
[Staple/Fold] and then select [Fold Only].
To use saddle stitching, select [Staple/
Fold] and then select [Saddle Stitch].
Original Orientation Top Edge on Top,
Top Edge on Left,
Auto
*1
Select the orientation of the original
document top edge to scan correct
direction. Select [Original Orientation] to
choose orientation of the originals, either
[Top Edge on Top] or [Top Edge on Left].
Then press [OK].