iSys iTerra Elite Color LED Printer User Manual
Page 45

_________________________________________________________________________________________________________________________
PAGE 45 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
II. FEEDER OPERATING INSTRUCTIONS
Loading Continuous Media
1) Manually load media
2) Turn on printer
3) The switch panel lights will illuminate in sequence during the feeder boot up.
4) Once the green light begins flashing on the feeder switch panel (media pre-load required), push and hold the
ADVANCE button until green light stops flashing and remains on (ready for printing)
NOTE:
The paper feeder will not automatically load the paper into the printer until Step 4 is completed. Step 4 must be
repeated any time the green light is flashing. This condition will exist if the printer is cycled off and on or if paper is
cleared from the feeder after a paper jam.
Feeder Switch Panel Functions
Cut Button
Pressing this button for 2 seconds will actuate a paper cut operation.
Cut paper must be cleared out from paper feeder.
Advance
Button
Pressing and holding this button will activate the paper pre-load
sequence. This button becomes locked out (inactive) during printing or
if the green light is on steady.
Feeder Switch Panel Indicators