iSys iTerra Elite Color LED Printer - Manual (Page 11)

_________________________________________________________________________________________________________________________
PAGE 11 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
II. INSTALLING ACCESSORIES
The items you will need to install your accessories are as follows: feeder, feeder-to-printer cable, media input tray, and top
media stacker (optional).
Feeder Installation
1) Remove feeder cable from plastic bag and set power cord aside.
2)
Using two people, place iTerra Elite printer on the table’s edge, just slightly, so that the feeder-to-printer cable can
be plugged into its appropriate socket (underneath printer).
3) Return printer to its original position with all four feet in a secure position.
4) Remove feeder from protective packaging.
WARNING: The iTerra Elite printer is very heavy and requires two people when lifting or moving.