iSys iTerra Elite Color LED Printer - Manual (Page 36)

_________________________________________________________________________________________________________________________
PAGE 36 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
If a printer was installed as an unshared device and it is later desired to share it, its status can be changed as follows:
1) Click START-SETTINGS-PRINTERS then right click on the icon for the printer to be changed, select
PROPERTIES and then click on the SHARING tab. The screen should look as shown below.
2) Click the SHARED AS button, which will enable the text box. Type the Share name in the box. Do not click on
ADDITIONAL DRIVERS. Drivers will have to be installed on the client systems that want to share this printer.
Click OK. The printer will appear as a shared resource in Network Neighborhood.