iSys iTerra Elite Color LED Printer - Manual (Page 37)

_________________________________________________________________________________________________________________________
PAGE 37 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
V. NETWORK CARD IP ADDRESS-CHECKING AND SETTING
The following section enables you to determine the printer’s IP Address as well as how to set it to the desired value. The
following actions will only create results if a network card is presently installed in the printer.
From the front operating panel of the printer, follow the instructions below.
Set IP Address
1. Press Button 0 9 times
Display will read “NETWORK MENU”
2. Press Button 1 once
Display will read “IP ADDRESS 000.000.000.000”
3. Press Button 1 or 5 to select address group to change
4. Press Button 2 or 6 to set the desired value
5. Press Button 3 to save changes
6. Press Button 4 to put printer back ONLINE
Set Subnet Mask Address
1. Press Button 0 9 times
Display will read “NETWORK MENU”
2. Press Button 1 5 times
Display will read “SUBNET MASK 255.000.000.000”
3. Press Button 1 or 5 to select address group to change
4. Press Button 2 or 6 to set the desired value
5. Press Button 3 to save changes
6. Press Button 4 to put printer back ONLINE
Set Default Gateway Address
1. Press Button 0 9 times
Display will read “NETWORK MENU”