ARM Electronics IP540_620MDVANVP - Manual (Page 8)

8
1.2.2 Connection cable view
Pic. 1―2 Connection Cable View
1) Camera Port: To connect Camera, Output of the same video signal that put into the Video Input Port.
U484 Power loop out /Video input Connector from Camera Module
2) Power Supply & Video Composite Output : Exclusive (provided) Adapter only,
Video composite signal(with 75Ω Drive) to CCTV Monitor.
Input port to connect with signal output from Camera, VTR, Quad, and DVR
U485 Power input / Video Loop output to External Connector
④ ⑤ ⑥
②
①
③
⑦
⑧