ARM Electronics IP540_620MDVANVP - Manual (Page 36)

36
4.6 DIO Setting
Pic. 4―19 DIO Setting
Tick on sensor to use and select type of sensor to use.
9 Sensor Type : designate type of sensor, NC, NO.
Designate name of sensor to use.
4 conditions are selectable for Relay. Relay name is to be input.
9 Disable : not to use Relay
9 Remote Control : to control Relay through Internet using Viewer
9 Local Control : Relay is on during ‘Duration’ time upon Event on Sensor, and then is to be off.
9 Remote & Local Control : Control Relay through Internet using Viewer. To be ON
during ‘Duration’ time upon event on Sensor, then to be OFF. It’s available to designate
name on Relay to use.