ARM Electronics IP540_620MDVANVP - Manual (Page 25)

25
Pic. 3―13 Main Page of IP540/IP620MDVAIVP
After [Pic.3-13] appears, check Video of IP540/IP620MDVAIVP referring to‘ 1. Video Check ’.
22) Check 2 (Check from outside)
After registration of IP540/IP620MDVAIVP in Server (refer to ‘‘ Use of Server ” of ‘‘ 5. Basic Use ’,
connect to IP540/IP620MDVAIVP by Domain Name (Server Name) allocated .
For example, run Web Browser and input Domain Name allocated to IP540/IP620MDVAIVP in URL. In
http://IP540.goodip.net , ‘IP540/IP620MDVAIVP’ is to be Name of Server registered in Server by user.
If the initial page is shown, check Video of IP540/IP620MDVAIVP referring to ‘ 1. Video Check ’. If Video
is seen, set up is properly done.
3.4 Cautions
If the firewall is used for security purpose, IP540/IP620MDVAIVP may not work properly. In this case, open
the port of IP540/IP620MDVAIVP, then it will work properly. The port being used by IP540/IP620MDVAIVP can
be checked
on ‘Port Setting’ of ‘Network Setting’ of ‘Administrator’s Page’.
Port of IP540/IP620MDVAIVP on ex-factory is set default as follows ;
¾ Web Connection Port : Port 80 TCP
¾ Authentication and Control Port: Port 9000 TCP
¾ Video Streaming Port : Port 9001 TCP
¾ Audio one-way Port : Port 9002 TCP
¾ Audio two-way Port : Port 9003 TCP
In setting user port, do not use 1504, 1508, which port is used in IP540/IP620MDVAIVP itself.