IDK MSD-804FD User Manual

Page 97

MSD-804FD Users Guide (Command Guide)

@SEC

Set control command (Control CEC)

Command format @SEC, no, delay, port, memo, error, ch_1, cec_1 (, ch_2, cec_2･･･)

Return value
format

@SEC, no, delay, port, memo, error, ch_1, cec_1 (, ch_2, cec_2･･･)

Parameter

: Command number

1 to 32

delay

: Delay time

0 to 999999

port : CEC control

524288 = CEC control

memo:

Up to 14 characters of 20 to 7D except 2C (,). “2 ASCII codes”

error

: Processing if no reply from destination device

0 = Stop, 1 = Execute (Continue)

ch_1-8

: Output

1 = OUT1A, 2 = OUT2A, 3 = OUT3A, 4 = OUT4A, 5 = OUT1B, 6 =
OUT2B, 7 = OUT3B, 8 = OUT4B*

* Can be set only if Cat5e/Cat6 output option is installed.

cec_1-4

: Control command

0 =Not controlled, 1 = POWER OFF, 2 = POWER ON

If you send a parameter only to the outputs to be controlled, the outputs without
sent parameter are automatically set to “0” (Not controlled). Normally, you do not
need to send the parameter, “0” (Not controlled) for cec_1-4.

Example

Send

Receive

@SEC,7,0,524288,DISPLAY1
ON,0,1,2

Delay: 0 ms

・

Memo: DISPLAY1 ON

・

Error: Stop

・

Turn on the device connected to

OUT1.
・

Not control all other outputs.

Related info.

8.12.1 Control commands