IDK MSD-804FD - Manual (Page 70)

MSD-804FD Users Guide (Command Guide)
70
3.3.10 EDID
@SED Set EDID
Command format @SED, ch_1, edid_1 (, ch_2, edid_2･･･)
Return value
format @SED, ch_1, edid_1 (, ch_2, edid_2･･･)
Parameter ch_1-8 : Input channel
0 = All inputs, 1 = IN1 to 5 = IN5
edid_1-5 : EDID data
0 = Built-in EDID [Default],
1 to 4 = EDID loaded from display device connected to OUTA* 1
5 to 8 = EDID loaded from display device connected to OUTB
101 to 108 = COPY DATA 1 to COPY DATA 8 *2
*1 OUT1B to OUT4B can be set only if Cat5e/Cat6 output option is installed.
*2 EDID data have to be loaded beforehand in @RME Copy EDID (P. 76).
Example Send
Receive
@SED,2,3
@SED,2,3
Set the EDID loaded from the display device that is
connected to OUT3A for IN2.
Terminated normally.
Related info. 8.9.1 EDID setting
@GED Get EDID
Command format @GED
Return value
format @GED, in_1, in_2, in_3, in_4, in_5, in_6, in_7, in_8
Parameter in_1 , in_2, in_3, in_4, in_5 : EDID data of each input channel
0 = Built-in EDID [Default],
1 to 4 = EDID loaded from display device connected to HDMI output
connector
5 to 8 = EDID loaded from display device connected to OUTB*
101 to 108 = COPY DATA 1 to COPY DATA 8 *2
* OUT1B to OUT4B can be set only if Cat5e/Cat6 output option is installed.
Example Send
Receive
@GED
@GED,0,0,0,3,0,0,
0,0
Get EDID data.
IN4: EDID loaded from display device
connected to OUT3; other inputs: built-in
EDID
Related info. 8.9.1 EDID setting