IDK MSD-804FD - Manual (Page 106)

MSD-804FD Users Guide (Command Guide)
106
@STL Set command key lighting
Command
format @STL, switch_1, led_1 (, switch_2, led_2･･･)
Return value
format @STL, switch_1, led_1 (, switch_2, led_2･･･)
Parameter switch_1-5 : Command key
0 = All command keys,
1 to 5 = COMMAND A to E
led_1-5 : Lighting condition
0 = Lights if command is registered [Default],
1 = Lights during command execution
Example Send
Receive @STL,2,1
@STL,2,1
COMMAND B: Lights during command execution.
Terminated normally.
Related info. 8.12.7 Command key lighting
@GTL Get command key lighting
Command
format @GTL, switch_1 (, switch_2･･･)
Return value
format @GTL, switch_1, led_1 (,switch_2, led_2･･･)
Parameter switch_1-5 : Command key
0 = All command keys,
1 to 5 = COMMAND A to E
led_1-14 : Lighting condition
0 = Lights if command is registered [Default],
1 = Lights during command execution
Example Send
Receive @GTL,5
@GTL,5,0
Get lighting condition of front panel COMMAND E.
Lights if command is registered.
Related info. 8.12.7 Command key lighting