IDK MSD-804FD - Manual (Page 66)

MSD-804FD Users Guide (Command Guide)
66
@GSF Get sampling frequency of analog audio input
Command
format @GSF
Return value
format @GSF, out_1 (, out_2 , out_3, out_4 )
Parameter out_1-4 : Sampling frequency of each input channel
0 = AUTO-A [Default], 1 = AUTO-B, 2 = 32 kHz, 3 = 44.1 kHz,
4 = 48 kHz, 5 = 96 kHz, 6 = 192 kHz
Example Send
Receive
@GSF
@GSF,0,0,2,0
Get sampling frequency.
OUT3: 32 kHz; other outputs: “AUTO”
Related info. 8.8.7 Sampling frequency of analog audio input
@GFD Get actual sampling frequency of analog audio input
Command
format @GFD
Return value
format @GFD, out_1 (, out_2 , out_3, out_4 )
Parameter out_1-4 : Actual sampling frequency of each output
1 = 32 kHz, 2 = 44.1 kHz, 3 = 48 kHz [Default], 4 = 96 kHz, 5 = 192 kHz
Example Send
Receive
@GFD
@GFD,3,3,2,3
Get actual sampling frequency.
OUT3: 44.1 kHz; other outputs: 48 kHz
Related info. 8.8.7 Sampling frequency of analog audio input
@SDO Set audio output connector
Command
format @SDO, ch_1, out_1, (, ch_2, out_2・･･)
Return value
format @SDO, ch_1, out_1, (, ch_2, out_2･・･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
out_1-4 : Audio output connector
0 = ANALOG only,
1 = DIGITAL (HDMI) only,
2 = ANALOG&DIGITAL (HDMI) [Default]
Example Send
Receive
@SDO,1,0
@SDO,1,0
OUT1: ANALOG only
Terminated normally.
Related info. 8.8.8 Output connector