IDK MSD-804FD - Manual (Page 124)

MSD-804FD Users Guide (Command Guide)
124
@SFZ Set freeze
Command format @SFZ, ch_1, freeze_1 (, ch_2, freeze_2･･･)
Return value
format @SFZ, ch_1, freeze_1 (, ch_2, freeze_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
freeze_1-4 : Freeze setting
0 = OFF [Default], 1 = ON
Example Send
Receive
@SFZ,1,1
@SFZ,1,1
Freeze OUT1 image.
Terminated normally.
Related info. 8.16.9 Input image capture
Note The image freezes temporarily. When input channel is switched or input signals
are changed, the freeze is released automatically and input image is output
normally.
@GFZ Get freeze
Command format @GFZ
Return value
format @GFZ, out_1 (, out_2, out_3, out_4 )
Parameter out_1-4 : Freeze setting of each output
0 = OFF [Default], 1 = ON
Example Send
Receive
@GFZ
@GFZ,1,0,0,0
Get freeze status.
OUT1: Freeze; other outputs: image is output
normally.
Related info. 8.16.9 Input image capture
@CAP Capture input image
Command format @CAP, ch, bitmap
Return value
format @CAP, ch, bitmap
Parameter ch : Output
1 = OUT1 to 4 = OUT4
bitmap :
1 = Bitmap 1, 2 = Bitmap 2, 3 = Bitmap 3, 4 = Bitmap 4
Only the divide number or smaller numbers can be specified.
Example Send
Receive
@CAP,1,2
@CAP,1,2
Register input image of OUT1 to Bitmap 2.
Terminated normally.
Related info. 8.16.9 Input image capture