IDK MSD-804FD - Manual (Page 79)

MSD-804FD Users Guide (Command Guide)
79
3.3.12 LAN port
@SIP Set IP address
Command
format @SIP, unit_1, unit_2, unit_3, unit_4
Return value
format @SIP, unit_1, unit_2, unit_3, unit_4
Parameter unit_1 : Upper bit of the IP address to unit_4 : Lower bit of the IP address
0 to 255 = 8 bit (Decimal notation) [Default]: 192.168.001.199
Example Send
Receive
@SIP,192,168,3,2
@SIP,192,168,3,2 Set IP address of the MSD-804FD to
“192.168.3.2”.
Terminated normally.
Related info. 8.11.1 IP address
Note After IP address or serial communication setting is changed, communication may
be disabled. Change environmental settings based on the settings of the MSD.
@GIP Get IP address
Command
format @GIP
Return value
format @GIP, unit_1, unit_2, unit_3, unit_4
Parameter unit_1 : Upper bit of the IP address to unit_4 : Lower bit of the IP address
0 to 255 = 8 bit (Decimal notation) [Default] 192.168.001.199
Example Send
Receive
@GIP
@GIP,192,168,3,2
Get IP address of MSD-804FD.
IP address is “192.168.3.2”.
Related info. 8.11.1 IP address
@SBI Set OUTB IP address
Command
format @SIP, unit_1, unit_2, unit_3, unit_4
Return value
format @SIP, unit_1, unit_2, unit_3, unit_4
Parameter unit_1 : Upper bit of the IP address to unit_4 : Lower bit of the IP address
0 to 255 = 8 bit (Decimal notation) [Default]: 192.168.001.200
Can be set only if Cat5e/Cat6 output option is installed.
Example Send
Receive
@SIP,192,168,3,2
@SIP,192,168,3,2 Set IP address of OUTB to “192.168.3.2”.
Terminated normally.
Related info. 8.11.1 IP address
Note After IP address or serial communication setting is changed, communication may
be disabled. Change environmental settings based on the settings of the MSD.