IDK MSD-804FD - Manual (Page 55)

MSD-804FD Users Guide (Command Guide)
55
@GFT Get video switching speed
Command
format @GFT
Return value
format @GFT, out_1 (, out_2, out_3, out_4 )
Parameter out_1-4 : Switching speed of each output
100 = 0.1 seconds to 2000 = 2 Seconds [Default] 350 = 0.35 Seconds
Example Send
Receive
@GFT
@GFT,400,350,350,350
Get switching speed of video input
channels.
OUT1: 400 ms; other outputs:350 ms
Related info. 8.7.6 Switching speed
@SWC Set wipe color
Command
format @SWC, ch_1, red_1, green_1, blue_1 (, ch_2, red_2, green_2, blue_2･･･)
Return value
format @SWC, ch_1, red_1, green_1, blue_1 (, ch_2, red_2, green_2, blue_2･･･)
Parameter ch_1-4 : Output
0 = All outputs, 1 = OUT1 to 4 = OUT4
red_1-4 : Wipe color (Red)
green_1-4 : Wipe color (Green)
blue_1-4 : Wipe color (Blue)
0 to 255 [Default]: 0
Example Send
Receive
@SWC,1,255,255,255
@SWC,1,255,255,255
Set wipe color (all RGB) of OUT1 to 255
(White).
Terminated normally.
Related info. 8.7.7 Wipe color
Note This command is valid only if @SFF (P. 53) is set to 3 to 6 (WIPE).
@GWC Get wipe color
Command
format @GWC, ch
Return value
format @GWC, ch, red, green, blue
Parameter ch : Output
1 = OUT1 to 4 = OUT4
red : Wipe color (Red)
green : Wipe color (Green)
blue : Wipe color (Blue)
0 to 255 [Default]: 0
Example Send
Receive
@GWC,1
@GWC,1,255,255,255
Get wipe color of OUT1.
All RGB: 255 (White)
Related info. 8.7.7 Wipe color