IDK MSD-804FD - Manual (Page 58)

MSD-804FD Users Guide (Command Guide)
58
@SHR Set the number of HDCP retries
Command
format @SHR, ch_1, retry_1 (, ch_2, retry_2･･･)
Return value
format @SHR, ch_1, retry_1 (, ch_2, retry_2･･･)
Parameter ch_1-8 : Output
0 = All outputs, 1 = OUT1A to 4 = OUT4A, 5 = OUT1B to 8 = OUT4B*
* OUT1B to OUT4B can be set only if Cat5e/Cat6 output option is installed.
retry_1-8 : the number of retries
-1 = Retry until succeed (ETERNITY [Default]), 0 = Not retry,
1 to 100 = Retry for arbitrary number of retries
Example Send
Receive
@SHR,4,10
@SHR,4,10
OUT4: Retry for up to 10 times (max.).
Terminated normally.
Related info. 8.7.10 The number of HDCP retries
@GHR Get the number of HDCP retries
Command
format @GHR
Return value
format @GHR, outA_1 (, outA_2, outA_3, outA_4, outB_1, outB_2, outB_3, outB_4)
Parameter outA_1-4 : The number of retries of OUTA’s each output
outB_1-4 : The number of retries of OUTB’s each output*
-1 = Retry until succeeding (ETERNITY [Default]), 0 = Not retry,
1 to 100 = Retry for arbitrary number of retries
* OUT1B to OUT4B can be set only if Cat5e/Cat6 output option is installed.
Example Send
Receive
@GHR
@GHR,-1,-1,-1,10,-1,
10,-1,-1
Get HDCP error retry.
OUT4A and OUT2B: Retry for up to 10 times;
other outputs: continue to retry until succeed
Related info. 8.7.10 The number of HDCP retries
@SDC Set Deep Color
Command
format @SDC, ch_1, color_1 (, ch_2, color_2･･･)
Return value
format @SDC, ch_1, color_1 (, ch_2, color_2･･･)
Parameter ch_1-8 : Output
0 = All outputs, 1 = OUT1A to 4 = OUT4A, 5 = OUT1B to 8 = OUT4B*
* OUT1B to OUT4B can be set only if Cat5e/Cat6 output option is installed.
color_1-8 : Color depth
0 = 24-BIT COLOR [Default], 1 = 30-BIT COLOR
Example Send
Receive
@SDC,1,0
@SDC,1,0
Set OUT1 to 24-BIT COLOR.
Terminated normally.
Related info. 8.7.11 Deep Color