Aiphone RAX R24/A User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATIONS
1. Calling & Communication (RA-A, RA-B & RA-D)
Press two-digit buttons of desired station (i.e.l 1
I
, | 0 | for station #10).
Note: Station numbers available: from 110 | to
I
If
I
for RAX-8 system
from 110 I to I 25 I for RAX-16 system
from to I 33 I for RAX-24 system
The line is established when a short tone sounds as well as call LED gets illuminated, and talk handsfree. After
communication, press p»~| (OFF) button.
When Busy Tone is heard;
Short intermittent tone means called station is occupied.
You may press | * | button or hang up handset in RA-D to disconnect OR press | 0 |
(ME MORY) button to leave request for automatic call back. You will be automatically
connected as soon as called station completes its conversation.
If your message is urgent;
You may break in on the called station's conversation by pressing
[
0 | button. Called
(Urgent Message or Break-in)
station will receive signal and place present conversation on
HOLD
to reply.
When Privacy Tone is heard;
Longer intermittent tone indicates called station is in Privacy Mode. You may wait for
station to release from Privacy Mode, as call tone will signal at the station in Privacy Mode
for about 4 seconds.
2. Rceiving a call (RA-A, RA-B, RA-D & RA-C)
An incoming call is annunciated by a short tone and call LED illumination.
Reply hands free.
In RA-A you may pick up the unit and depress and hold the bar switch and in RA-D,
pick up handset for private handset communication. After communication, press the
I » I (OFF) button or hang up handset in RA-D,
Urgent Message Break-in Signal;
A short tone, like the call tone, received during a conversation indicates another station
is trying to reach you with an urgent message.
Press [ 0 I (MEMORY) button to place present call on HOLD and automatically connect
you to the calling station.
Touch I • I (OFF) button or hang up handset in RA-D to restore connection to station
on HOLD and resume conversation.
Privacy
I---- B
To block out incoming calls and prevent monitoring, slide PRIVACY SWITCH to the right position.
'
------------------ ^
An incoming call is announciated by longer intermittent tone signalling about 4 seconds. Press | >i< | (TEMPORARY
PRIVACY) button to reply hands free or, in RA-A, pick up the unit and hold the bar switch or, in RA-D, pick up hand
set to reply. After communication press [ > | (OFF) button or hang up handset in RA-D and the station automatically
returns to PRIVACY mode.
To release from Privacy Mode, slide PRIVACY SWITCH to the left position.'----------------- J
* Setting or releasing from Privacy Mode must be made while your station is in standby mode.
-21-