AltiGen MAXCS 7.5 Telephony Hardware - Manual (Page 14)

FCC Requirements
8 Telephony Hardware Manual
Table 3. Network Digital Trunk Interfaces for Digital Services (MAX4000 family)
MAX T1/E1 PRI FCC Registration No., Part 68 US:5SMPF13BMAX4000
Manufacturer Port
Identifier Facility Interface
Code (FIC)
Service
Order Code
(SOC)
Network Jack
(USOC)
ALTI-VT1E1SM-1PT,
ALTI-VT1E1-2 04DU9-BN (SF) 6.0P/AS.2 RJ-48C
a
04DU9-DN (SF
B8ZS) 6.0P/AS.2 RJ-48C a
04DU9-1KN (ESF) 6.0P/AS.2 RJ-48C a
04DU9-1SN (ESF
B8ZS) 6.0P/AS.2 RJ-48C a
a. The MAX4000 T1/PRI interface (ALTI-VT1E1SM-1PT, ALTI-VT1E1-2) connects to the
Public Switched Telephone Network through an FCC registered NCTE which specifies
the type of network jack to be used.
Table 4. Triton Analog Trunk Interfaces for Loop Start/Ground Start
and Loop Start Services
Manufacturer Port
Identifier Facility Interface
Code (FIC)
REN
Network Jack
(USOC)
ALTI-TTAT-12GS 02GS2/02LS2 0.5B RJ-21X
ALTI-TTAT-12 02LS2 0.5B RJ-21X
ALTI-TTAT-8 02LS2 0.5B RJ-21X
Table 5. Proton Analog Trunk Interfaces for Loop Start and Loop Start Services
Proton Series Registration No., Part 68 US:5SMPF13BPROTON
Manufacturer Port
Identifier Facility Interface
Code (FIC)
REN
Network
Jack
(USOC)
ALTI-P0800 02LS2 1.3B RJ-21X
Table 6. MAX1000/2000 family of Analog Trunk Interfaces for Loop Start
and Loop Start Services
Manufacturer Port
Identifier Facility Interface
Code (FIC)
REN
Network Jack
(USOC)
ALTI-M0408 02LS2 1.3B RJ-21X
ALTI-M0804 02LS2 1.3B RJ-21X