AVer SecureCenter User Manual
Page 15
10
Name
Function
(5) Network
Enable/disable the remote alarm data received. This is activated
automatically when the SecureCenter software starts up.
(6) Setup
Configure the SecureCenter system settings. Only the administrator is
authorized to access this command. (see also
(7) Playback
Select to playback video from the local hard disk or remote NVR server
(see also
).
(8) Alarm Center
To view, search, and navigate the alarm (see also
(9) NVR Status
To view all monitor NVRs
’ status – Name, IP, CPU usage, Bandwidth
usage, HDD free space, Present NVR Time, Recording Status, Estimated
Storage, Connection status, Video Loss status
….and so on.
(10) Camera ID
Show the number of cameras that are being viewed. When you are in
single screen mode, click the camera ID number to switch and view the
camera. This function only available in Alarm Live Video mode.
(11) Refresh
To refresh the alarm video that display on the screen. This function only
available in Alarm Live Video mode.
(12) Split Screen
Mode
Select from 5 different split screen types to view all the cameras. It also
allows you to switch and view different camera number by click Camera
ID in a single screen mode. This function only available in Alarm Live
Video mode.
(13) Log extender /
reduce
Expand and reduce the log viewer
Expanded Log viewer