2 using the securecenter application – AVer SecureCenter User Manual
Page 14
9
3.2
Using the SecureCenter Application
When an alarm occurred on the NVR server, the video is transmitted to the SecureCenter and display
on the main screen. The transmit video can be an image or live video. User can select the type of
video transmitting in System setting (see also
). You may download and playback the
complete video directly from the NVR server by clicking on the event log. Make sure the main NVR
server is set to send video to the SecureCenter when an alarm has occurred.
The video stream before the eye indicates the latest occurrence. Also, there is a red frame which
indicates the latest occurrence when the video transmitting is alarm image type.
SecureCenter in Alarm Live Video Mode
Name
Function
(1) E-map (F3)
Switch to display the map and show the location of the NVR server on
the map. If you are using a single monitor, press ESC to revert back to
the SecureCenter main application( see also
(2) Monitor (F4)
Switch to display live video from the selected NVR servers group. If user
is using a single monitor, press ESC to revert back to the SecureCenter
main application (see also
(3) Reset Alarm
Click to reset all NVR alarm status
(4) MiniCenter Viewer
To call out the MiniCenter viewer. Also, user can double click on screen
or alarm event to call out the MiniCenter Viewer.(Also refer to