Hudson Robotics SOLO - Manual (Page 9)

9
2.3 – Multichannel
The Multichannel SOLO is disassembled during shipping to prevent damage. The
Multichannel head is removed for shipping. To set up; the Multichannel head is pressed
into the SOLO’s z-axis. Align the Multichannel head assembly with the Pipettor Drive
assembly locking stud. (See Figure 2.3) You will then press the Pipettor head firmly into
place until you hear the locking mechanism snap in place. (See Figure 2.4)
Figure 2.3 Figure 2.4
Lock
Engaged