Hudson Robotics SOLO - Manual (Page 41)

41
3.10 – Prime Step
The Prime step allows a user to prime or evacuate “D” type syringe liquid lines,
or to position a “P” type syringe piston at a desired position, at the start of a
method, or even at intermediate places in a method.
The display for a SOLO equipped with a “D” type syringe appears as follows:
A SOLO can have multiple “D” type syringe pumps (up to 10), and this
step allows any individual syringe pump to be exrcised, or all at once. If all are
exercised at once, the “Total Volume” selection is greyed-out, and only the
“Strokes” selection is allowed. Also, the valve port selection must be the same
for all.
The display for a SOLO equipped with s type “P” syringe appears as follows: