Hudson Robotics SOLO - Manual (Page 19)

19
Save –
This will save the currently active method only, using the path and name
shown along the title bar of that method.
Save As… -
This allows the user to select a different path and/or name for the currently
active method. This new path.name will then appear in its title bar.
Print –
This will send the currently active method to the user’s printer in a text
format.
Exit –
This selection will close SOLOSoft.
2.3 – View Menu
Toolbar –
Checking this option displays the Toolbar buttons along the upper left area of
the Main Screen, immediately below the Menu Bar. Unchecking this hides
these.
Status Bar –
Checking this option displays the status bar across the bottom of the Main
Screen. Unchecking it hides this bar.
Enable Logging –
Checking this option will establish a Method Log File for each method that is
run. Every step executed by the method will have its date and time of
completion logged, along with process data applicable to that step (if any).
The log file is saved in the same folder as the SOLOSoft application, and has
the file name “MethodName YYYY-MM-DD HH-mm-SS.log”, where
MethodName is without the “.hso” extension, and the date/time in the name
refers to the moment that method is started.
Refresh –
This refreshes the display of currently opened methods.