IEI Integration ITDB-100L - Manual (Page 61)

ITDB-100L Barcode Reader
Page 52
5.10 FW Upgrade and Backup Mode
This section covers how to upgrade the device FW and enter the backup mode when the
FW upgrade is failed or the ITDB-100L is failed to restart.
5.10.1 FW Upgrade Flow Chart
Start
The ITDB-100L
restarts successfully
and the FW is upgraded
to the latest version
Done
Remove the
power supply
No
Yes
Reconnect the power
supply and enter the
Backup Mode (refer
to Section 5.9.3)
Upgrade the FW (refer
to Section 5.9.2)
Remove the
power supply,
then reconnect it
Upgrade the FW (refer
to Section 5.9.2)
The ITDB-100L
restarts automatically.