IEI Integration ITDB-100L - Manual (Page 56)

ITDB-100L Barcode Reader
Page 47
5.7 Settings Menu
Click SETTING to display the Settings menu (Figure 5-17). In this menu, the user can
configure detailed settings for the barcode reader.
Figure 5-17: Settings
ƒ Trigger mode:
The user can set the trigger behavior as One Shot, Serial Shot, Batch or
Presentation . When setting to Serial Shot, the ITDB-100L scans images
continuously until an image is decoded successfully.
ƒ Decode result format:
The user can set the scanned result format as Image & Decode, Image or
Decode .
ƒ Auto Exposure:
Check the ON box to let the device adjust the exposure value automatically.
NOTE:
When the Auto Exposure function is turned on, the Manual Exposure,
GAIN and LED Brightness items will not be available to set up.