IEI Integration ITDB-100L - Manual (Page 27)

ITDB-100L Barcode Reader
Page 18
Figure 3-3: Adjusting the ITDB-100L
3.3 External Peripheral Interface Connectors
The ITDB-100L has the following connectors. Detailed descriptions of the connectors can
be found in the subsections below.
ƒ 6-pin connector for trigger connection
ƒ Ethernet
ƒ Micro USB
ƒ Power input
3.3.1 6-Pin Connector for Trigger Connection
The 6-pin connector on the rear panel allows connection to an external trigger device or a
sensor. The user can use the supplied trigger connection cable to connect the ITDB-100L
to an external device.
Step 1: Locate the 6-pin connector . The location of the 6-pin connector is shown in
Figure 1-3 .