IEI Integration ITDB-100L - Manual (Page 59)

ITDB-100L Barcode Reader
Page 50
ƒ Address:
Click DHCP to enable the DHCP function or set up the IP address, mask and
gateway manually.
ƒ Server IP:
Click Enable, enter the server IP, and then click Save IP to save the keyed-in
server IP.
ƒ DNS IP:
Click Enable, enter the DNS IP, and then click Save DNS IP to save the
keyed-in DNS IP.
ƒ Device Name:
Enter a name and click Set Device Name to set up a device name for the
barcode reader.
5.9 Security Menu
Click SECURITY on the left pane of the setup tool to bring up the Change Password menu
(Figure 5-20). In this menu, the user can set up a password for the ITDB-100L. When a
password is set, the user has to enter the password before configuring the barcode
reader.
NOTE:
The default old password is 1234.
If the user forgets the password, it is necessary to enter the Backup
Mode to reset the password. Refer to Section 5.10.3 on how to enter
and exit the backup mode.