IEI Integration ITDB-100L - Manual (Page 28)

ITDB-100L Barcode Reader
Page 19
Step 2: Align the connectors . Align the 6-pin plug on the trigger connection cable with
the 6-pin connector on the ITDB-100L. See Figure 3-4.
Figure 3-4: Trigger Connection
Step 3: Insert the trigger connection cable 6-pin plug . Once aligned, gently insert the
trigger connection cable 6-pin plug into the 6-pin connector on the ITDB-100L.
Step 4: Connect the other end of the trigger connection cable to an external device.
The pinouts of the 6-pin connector are shown below:
Pin Color Signal
1 Red Output of LED Flash Trigger
2 Black Ground for the Output of LED Flash Trigger
3 Blue Input of Interrupt Trigger
4 Black Ground for the Input of Interrupt Trigger