IEI Integration ITDB-100L - Manual (Page 48)

ITDB-100L Barcode Reader
Page 39
Step 4: When the connection is complete, two beeps should be generated, and the
connection status field displays Connected as shown in Figure 5-5.
Figure 5-5: Connection Status
Step 5: In the Configuration page (Figure 5-5), click Manual Setup to enter the
SETTING menu to configure the barcode reader settings manually.
For automatic setup, refer to Section 5.5 for details.
5.5 Automatic Setup
The user may select automatic setup to allow the ITDB-100L to adjust to the optimal
settings for decoding an image successfully. Follow the steps below to use the automatic
setup.
Step 1: Click Auto Setup in the Configuration page (Figure 5-6).