IEI Integration ITDB-100L - Manual (Page 24)

ITDB-100L Barcode Reader
Page 15
3.1 Installation Precautions
During installation, be aware of the precautions below:
ƒ Read the user manual: The user manual provides a complete description of
the ITDB-100L, installation instructions and configuration options.
ƒ DANGER! Disconnect Power: Power to the ITDB-100L must be
disconnected during the installation process. Failing to disconnect the power
may cause severe injury to the body and/or damage to the system.
ƒ Qualified Personnel: The ITDB-100L must be installed and operated only by
trained and qualified personnel. Maintenance, upgrades, or repairs may only
be carried out by qualified personnel who are familiar with the associated
dangers.
3.2 Mounting the ITDB-100L
The ITDB-100L is shipped with a mounting bracket that allows the ITDB-100L to be
mounted onto an object with corresponding mounting screw, such as a tripod. To mount
the ITDB-100L onto an object using the mounting bracket, please follow the steps below.
Step 1: Attach the mounting bracket to the bottom panel of the ITDB-100L. Secure the
bracket to the ITDB-100L with the four supplied retention screws. See Figure
3-1 .