beautypg.com

Sm series – General Pump SM Repair Manual User Manual

Page 17

background image

GENERAL PUMP

A member of the Interpump Group

SM SERIES

Fully insert the shaft in the casing (1, fig. 50 and fig. 51).

Page 17

Pre-assemble the outer ring of the pinion bearing on the reduction gear with the aid of special tool part

#F27604900 (1, fig. 52), inserting fully down to end stroke (1, fig. 53).

Ref 300894 Rev.A

06-12

From the opposite side of the reduction gear box, preassemble the external ring of the crankshaft bearing

with the use of tool part #F27605000 (1, fig. 54), inserting fully down to end stroke (1, fig. 55).