PROLiNK PRO1301WE User Manual User Manual

Page 23

With VGA cable

Problem

Screen Display

Solution

No screen

image

Please check if the video power plug is correctly

connected to the Mobile Monitor’s video power

port.

Blank screen

Please check if USB-Powered cable is connected

to a 5V DC power source.

Please adjust Brightness and Contrast settings, or

reset them to factory default via OSD.

OSD displays “No

signal” warning

Please check if Digital Video cable is correctly

connected to Mobile Monitor’s video input port

and computer’s VGA output port.

Abnormal

screen image

Image disappears

or image size is

too big, too small,

or image is not

centralized

Please adjust resolution, clock, horizontal

position and vertical position via OSD.

If your laptop does not have the option of “Duplicate these displays”, “Extend
these displays” or “portrait”, it could be limited by the graphics chip of the laptop,

or the graphics chip function is limited by the laptop’s power saving mode, or the

graphics chip driver needs an update. Please seek for technical support from your

laptop manufacturer or graphics chip maker