INTELLINET NETWORK 524681 User Manual - Manual (Page 95)

88
3-2 Network Address Translation (NAT)
Network address translations solve the problem of sharing a single
IP address on multiple computers. Without NAT, all computers
must be assigned a valid Internet IP address to get connected to
the Internet, but Internet service providers provide only a very few
IP addresses to each user. Therefore, it’s necessary to use NAT
technology to share a single Internet IP address on multiple
computers on a local network so everyone can get connected to the
Internet.
3-2-1 Basic NAT Settings
Click “NAT” on the left side of the Web management interface, and
the following message will be displayed on your Web browser:
To enable the NAT function, select “Enable”; to disable, select
“Disable.”
After you make the selection, click “Apply” (2) and the following
message will be displayed on your Web browser:
1
2